Descargar Imprimir esta página

Audizio CORNO Manual De Instrucciones página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must
be returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately.
The arising condensation water might damage your device. Leave the device switched off until it has reached room
temperature.
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the
mains voltage corresponds to this, all other voltages than specified, the device can be irreparably damaged. The product must
also be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
1. Volume control
Rotate to adjust the volume level
2. Power
On/standby
3. Scan
Press to scan for stations automatically
4. Menu
Press in DAB- and FM mode to show software version
5. Info
Press to show channel information
6. Alarm
Press to set an alarm
7. Mode
Press to change modes
Press and hold to initiate factory reset function
8. Preset
Press and hold to save a channel as preset
Press to recall saved presets
9. Quick preset 1,2 & 3
Press to quickly recall preset 1, preset 2 or preset 3
10. Tune/Select
Rotate to tune
Press to select
11. LCD display
12. Speaker
13. Antenna
14. DC 5V IN
15. Aux in jack 3.5 mm
16. Battery compartment (4x size "C")
• Remove the radio from the package box.
• Plug in the power adapter or insert the correct batteries and press [Power].
Caution: Use only the adaptor supplied with the radio. Connecting a power supply with a different rating can cause
permanent damage to the radio and may be hazardous.
When powering the radio by batteries, make sure to disconnect the power adapter from the mains. Close the battery
compartment correctly before use. Check the batteries regularly. Remove the batteries from the compartment when not in
use to avoid possible leakage.
If there is Digital Audio Broadcasting (DAB) in your area, the Radio can pick up the DAB stations as well (no internet
connection is required). The radio supports both DAB and DAB+.
Place the radio close to the window and extend the antenna as far as it can go to get the best reception. Sometimes you may
need to adjust the direction of the antenna to improve reception.
Press [Mode] to select DAB mode.
5

Publicidad

loading

Este manual también es adecuado para:

102.427