stayer MINICOM B Manual De Instrucciones página 17

5.4 Disposal
We recommend subjecting all electric tools, accessories
to a recycling respecting the environment.
For EU countries only:
Do not throw electric tools to the garbage!
According to European Directive 2012/19/UE
on electric and electronic devices, after
transposition thereof into national law, electric
tools must be collected separately so as to be
subject to ecologic recycling.
Right to change reserved.
6. Regulatory Marking
6.1 Technical specifications
= nominal power
= voltage
V
1
= nominal pressure
Bar
= flow rate
= protection class
= weight
kg
Pay attention to the article number on the feature plate of
your device.
Information on noise and vibration
Noise determined according to EN 60745.
The typical sound pressure level as determined with an A
filter, amounts to: Sound pressure level 88 dB(A); acoustic
power level 99 dB(A). Tolerance K=3 dB.
Wear ear protectors!!
Livello totale di vibrazioni
direzioni) determinato secondo EN 60745: levigatura di
parete di gesso ah = 4 m/s2, K = 1,5 m/s2.
Total level of vibrations (vector sum of three directions)
determined according to EN 60745: Plaster wall sanding
ah=4 m/s2; K=1.5 m/s2.
The level of vibrations stated in these instructions has been
determined according to regulation EN 60745, and may
serve as a basis for comparison with other electric tools.
The level of vibrations as stated has been determined for
the main applications of the electric tool. Therefore, the
level of
vibrations may be different where the electric tool is used
for other applications with different implements, or where
maintenance thereof were deficient. This may result in
a drastic increase in vibration stress during the whole
working period.
So as to determine exactly the stress suffered by vibrations,
(somma vettoriale di tre
ENGLISH
17
it is necessary to consider as well those periods where the
apparatus is disconnected or also it is working but without
being used really. This may result in a drastic reduction
of the stress by vibrations during the whole working
period. Establish additional safety measures to protect
the user against the effects of vibrations, as for example:
Maintenance of the electric tools and of the implements,
keeping hands warm, organization of the work sequences.
17