NS-27HTV 27-inch Color TV
When V-Chip Mode Conflict—Set to block
or view. When the V-chip has a conflict, the
user can decide the programs received to
view or block.
MPAA Rating—If you set the password, you
need to input the password to enter this menu.
There are seven ratings for MPAA Rating: NR,
G, PG, PG-13, R, NC-17, X. Select one rating,
then press the ENTER button to set it to lock or
unlock. You can automatically block all MPAA
ratings above a specified rating level. Also, all of
the age-based ratings are locked or unlocked
within the particular group.
Note
MPAA Rating:
• G—General audience. No restriction.
• PG—Children under 13 should be
accompanied by an adult.
• PG-13—Parental guidance suggested.
Children under 13 should be accompanied
by an adult.
• R—Restricted. Viewers should be 17 or
older.
• NC-17—Not classified. Viewers should be
17 or older.
• X—Adults only.
• NR—Not rated.
TV Rating—Press the arrow buttons to select
the rating, the press the ENTER button to select
the rating to be locked or unlocked. Also, more
restrictive ratings can be locked or unlocked.
Note
TV Rating:
• TV-Y—All children. The themes and
elements in this program are specifically
designed for a very young audience,
including children from ages two to six.
• TV-Y7—Directed to older children. Themes
and elements in this program may include
mild physical or comedic violence, or may
frighten children under the age of seven.
• TV-G—General audience. It contains little
or no violence, no strong language, and
little or no sexual dialogue situations.
• TV-PG—Parental guidance suggested.
The program may contain infrequent
coarse language, limited violence, some
suggestive sexual dialogue, and situations.
• TV-14—Parents strongly cautioned. This
program may contain sophisticated
themes, sexual content, strong language,
and more intense violence.
• TV-MA—Mature audiences only. This
program may contain mature themes,
profane language, graphic violence, and
explicit sexual content.
CE Rating—Press the arrow buttons to select
the rating, then press the ENTER button to lock
or unlock it. Also, more restrictive ratings can be
locked or unlocked.
CF Rating—Press the arrow buttons to select
the rating, then press the ENTER button to lock
or unlock it. Also, more restrictive ratings can be
locked or unlocked.
Note
The Last Two Items—The last two items can
show one or two rating contents depending on
the program preferences received. User can
enter this menu to control program property, and
decide which program they can view by setting it
to lock or unlock.
Using the System menu
The System menu allows you to set passwords
and specify settings for the OSD.
OSD
Select Menu Language—Select English,
Spanish, or French. Use
language, then press the ENTER button to
confirm. Press the EXIT button to return to
the previous menu.
Select OSD Transparency—Select Low,
Middle, or High. Press the EXIT button to
return to the previous menu.
Select OSD Timeout—Select Short, Middle,
or Long. Press the EXIT button to return to
the previous menu.
Password
Enter Password—Press the digital number
buttons to type the password.
Confirm Password—Repeat the password
you just typed to confirm the password.
Password—Saves or clears the password. If
you forget your password, you can reset it.
Enter 1739 as the password (default), then
change it to a new one.
Troubleshooting
The most common types of television
interference are as follows:
Problem
Snowy picture
Double image or ghosts
Radio wave interference
www.insignia-products.com
or
to select the
Solution
• VHF/UHF: This is
usually caused by a
weak signal. Adjust the
antenna or install an
antenna amplifier.
• VHF/UHF: This is
usually caused by
reflections from a tall
building. Adjust the
direction of the
antenna or raise it.
• VHF/UHF: This is
usually caused by
nearby radio
transmitters or
shortwave receiving
equipment.
9