BEMIS 538410 Manual De Instrucciones página 3

MANIFOLD ONLY
MANIFOLD ONLY
1. Clip manifold to top of stand.
2. Attach tubing connections of manifold to the ports
1. Clip manifold to top of stand.
underneath the reusable canister/bracket.
2. Attach tubing connections of manifold to the ports
3. Attach patient tube to the patient port of any of the four
underneath the reusable canister/bracket.
Quick-Fit liners.
3. Attach patient tube to the patient port of any of the four
4. Cap pour spouts and tandem ports of all canisters. (The patient ports of the other canisters
Quick-Fit liners.
do not have to be capped if the stopcock for that canister is closed.)
4. Cap pour spouts and tandem ports of all canisters. (The patient ports of the other canisters
5. Open stopcock for the first canister; close stopcocks for the other canisters.
do not have to be capped if the stopcock for that canister is closed.)
6. Connect vacuum tubing to the manifold vacuum port.
5. Open stopcock for the first container; close stopcocks for the other containers.
6. Connect vacuum tubing to the manifold vacuum port.
WHEN FIRST CANISTER IS FULL:
WHEN CANISTERS ARE FULL:
1. Remove the patient tube and cap the patient port.
2. Close the stopcock.
1. Remove the patient tube and cap the patient port.
3. Attach the patient tube to the patient port of the next canister.
2. Close the stopcock.
4. Open stopcock for the second canister.
3. Attach the patient tube to the patient port of the next canister.
5. Disconnect vacuum tube from vacuum port of full canister.
4. Open stopcock for the second canister.
6. Replace full liner if necessary and dispose of according to hospital policy.
5. Disconnect vacuum tube from the vacuum port of full canister.
Note: All used and unused liners must be discarded after procedure.
6. Replace full liner if necessary and dispose of according to hospital policy.
Note: All used and unused liners must be discarded after procedure.
IMPORTANT: Be sure that the patient port is capped before closing stopcocks or disconnecting
vacuum tubing.
IMPORTANT: Be sure that the patient port is capped before closing stopcocks or disconnecting
vacuum tubing.
P = PATIENT
V = VACUUM
T = TANDEM
V
P
T
STOPCOCK
OFF
POSITION
(CLOSED)
T
V
P
MANIFOLD
VACUUM PORT
STOPCOCK
STOPCOCK
STOPCOCK
P
V
T
Quick-Fit Suction Liner System
™
Quick-Fit Suction Liner System
™
4-Canister Stopcock Manifold
4-Canister Stopcock Manifold
MODEL #
538410
MODEL #
534910
538410
534910
TO
VACUUM
P
T
V
SIDE VIEW OF
VACUUM PORTS
STOPCOCK
OFF
POSITION
(OPEN)
4-Liner Stopcock Manifold
4-Canister Stand
4-Liner Stopcock Manifold
4-Canister Stand
TO
PATIENT
3
3