The air quality sensor scans the air continuously to detect the ultra-fine
particles. This information is reported continuously in both the digital
display and the light ring, providing real-time PM2.5 feedback.
Air quality light color Air quality level
Blue
Good
Purple
Ok
Orange
Poor
Red
Bad
Table 18 Air quality light colors and PM2.5 levels
TVOC
TVOC stands for total volatile organic compounds. A VOC is an organic
substance which can be vaporized by small changes in temperature or
pressure, and are a category of air pollutant. Exposure to high levels of
VOCs can cause for example, eye, nose and throat irritation or
headaches.
The display ranging from L1 to L4 shows the level change of
potentialharmful gases detected. L1 indicates the best air quality.
Level TVOC
Level mg/m
L1
<0.3 mg/m
L2
0.3 to 0.5 mg/m
L3
0.5 to 1 mg/m
L4
1 to 3 mg/m
Table 19 TVOC light colors and levels
Note
The display only shows the TVOC levels and has no impact on the light
ring colors that are showed.
4.2
Switching ON/OFF
▶ Insert the plug of the air purifier in the power socket.
▶ Touch
to switch on the air purifier.
▶ Press the
button to switch off the air purifier.
Note
• For optimum purification performance, close the doors and the
windows.
• Keep curtains away from the air inlet or air outlet.
• The air purifier will operate in Auto mode by default, with PM2.5 and
TVOC displayed on the center of the screen.
4.3
Changing the mode setting
Auto-mode
• In Auto-mode, the air quality is registered in real-time, and the
appliance automatically adjusts the fan speed in accordance to the
ambient air quality.
Manual mode
• In Manual mode, it is possible to set the fan speed (between Speed 1
and Speed 5). Press the
Quiet mode
• In Quiet mode, the air purifier operates quietly at a low speed and all
the lights are dimmed.
Timer mode
• In Timer mode, it is possible to set the timer (between 1 hour and 12
hours) for the equipment shut off.
Air 6000 – 6721848696 (2022/11)
PM2.5 level
0-12
13-35
36-55
>56
3
Level of concern
3
Low
3
Acceptable
3
Marginal
3
High
button to change to the desired speed.
5
Cleaning and maintenance
5.1
Cleaning the housing of the air purifier
Regularly clean the inside and outside of the housing of the air purifier to
prevent dust from collecting.
▶ Wipe the surface with a damp cloth.
▶ Use a soft, dry cloth to clean both the interior and exterior of the air
purifier and the air outlet.
5.2
Cleaning the air quality sensor
Note:
• If the air purifier is used in a dusty environment, it may need to be
cleaned more often.
• If the humidity level in the room is very high, condensation may
develop on the air quality sensor and the air quality light may indicate
a poorer quality even though the air quality is good.If this occurs,
clean the air quality sensor.
Clean the air quality sensor every month for optimal functioning of the
appliance.
1.
3.
Fig. 56 Cleaning the air quality sensor
Cleaning and maintenance
2.
4.
0010043093-001
51