Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION OF THE MACHINE
Be sure to carefully read and follow safety
-
instructions.
Keep hands away from blades. Never grasp the
-
exposed cutting blade or cutting edges，when
picking up or holding the tool.
Never touch the cutting device when starting the
-
engine and during operation.
Operate the Hedge Trimmer in such a manner as
-
to avoid inhalation of the exhaust gases. Never
run the engine in enclosed rooms (Risk of gas
poisoning). Carbon monoxide is an odorless gas.
All protective installations and guards, supplied
-
with the machine must be used during
operation.
Never operate the engine with a faulty exhaust
-
muffler or if it is missing.
Use the Hedge Trimmer only in good light and
-
visibility. Always ensure a safe footing.
Never stand on a ladder and run the Hedge
-
Trimmer. Keep both feet on the ground.
Never climb up the trees with the Hedge
-
Trimmer to perform cutting operation.
Never work on unstable surfaces.
-
Remove sand, stone, nails, wire, etc. found
-
within the working area. Foreign objects may
damage the cutting blades.
Before commencing cutting, the cutting blades
-
must have reached full working speed.
Always hold the Hedge Trimmer firmly with both
-
hands one handles only.
The right hand grip with thumbs and fingers
-
encircling the handles.
When you release the throttle，it takes a few
-
moments before the cutting blades stop.
The Hedge Trimmer must not be used for cutting
-
with fast idle. The cutting speed cannot be
adjusted with the throttle control in fast idle position.
When cutting a hedge，the machine should be held so that the blades from a 15-
-
30' angle with the cutting line.
If the Hedge Trimmer is used with circular movements against the edge of the
-
hedge, the Hedge Trimmer is used with circular pendulation, swinging up and
down close to the hedge.
Pay special attention when cutting hedges which are laid out a long a wire-fence
-
Publicidad
