Publicidad
Idiomas disponibles
Idiomas disponibles
FILTRATION SYSTEM
Filtration system
Antimicrobial pre-filter
Nano silver antibacterial
gel filter
High efficiency HEPA filter
Honeycomb activated
carbon filter
Cold catalyst filter
UV sterilization
Negative ion
CLEANING AND MAINTENANCE
The lifetime of the filter differs based on indoor environment, usage times and usage location.
To improve the efficiency, please purchase the filter suggested by PURLINE (Ref.: FA30F).
Please make sure the power is cut off before replacing new filter.
Unplug the appliance before cleaning.
Do not use harsh chemicals for cleaning.
No water on the control panel.
Do not flush by water or soak any filter to be used on this product.
Antimicrobial pre-filter should be cleaned by soft brush every half month to clear away the large pollutant, like hairs.
The surface of the appliance can be cleaned using wet cloth with a little mild detergent. Do not rinse directly with
water.
FRONTAL PANEL / FILTER
Please make sure the power is shut down and the plug is pulled out before disassembling the product..
1. Disassemble the front panel
Hold the top of the front panel, pull the panel out to a
45-degree angle, then lift up the panel.
2. Disassemble the filter
Pull and hold the two braces on both sides of the filterby,
then pull it slightly to disassemble it.
EN
Function
Filter large particle or hair
Kill all kinds of bacteria
Filter PM2.5, source of allergy, powder,
bacteria, virus and mycete
Eliminate peculiar smell, absorbs harmful gas
Efficiently resolve formaldehyde,
benzene, ammonia gas, TVOC,
sulfuretted hydrogen or other harmful gas
Efficiently kill all kinds of bateria
for disinfection
Eliminate dust, fresh the air, remove indoor
static electricity for sterilization
3. Assemble the filter
Align the filter to the slot, the side with braces outward,
then push into the unit slightly.
4. Assemble the front panel
Insert the bottom buckle to the holes in the front cover,
then assemble the front panel into the cover slightly.
7
Publicidad
