Jackery Explorer 1500 Pro Manual Del Usuario página 9

Caution: When the two inputs are used at the same time, please make sure to use the same type of
solar panel and the number of solar panels in the two inputs must be the same to avoid damage or
charging problems of the equipment due to inconsistent voltages of the two channels.
The following way of connections are prohibited to charge this product:
SolarSaga×2
SolarSaga×3
SolarSaga×3
Jackery SolarSaga 80 Solar Panel Connection Guide
Users who have purchased Jackery SolarSaga 80 can charge the product by referring to the connection mode
shown below. The Jackery SolarSaga 80 supports the parallel connection or the parallel and then series connections
to charge the product. The single input port of the Jackery Explorer 1500 Pro supports the input of up to six pieces of
SolarSaga 80 solar panels, and two input ports support the input to up to 12 pieces of SolarSaga 80 solar panels.
(When the power is connected with six solar panels in a single input port, the solar panels shall be divided into two
groups, and each group of three solar panels shall be self-connected in parallel and then connected to Jackery
Explorer 1500 Pro through the solar series connector. The solar series connector needs to be purchased separately.)
For detailed operation instructions on the self-parallel connection of the Jackery SolarSaga 80 solar panel, please
refer to the user manual.
Explorer 1500 Pro
Explorer 1500 Pro
Explorer 1500 Pro
GB
SolarSaga×1
SolarSaga×1
SolarSaga×2
06