invicon blue:tron Instrucciones De Uso página 8

OLED display
Function keys
Battery pack 1
Fan
On/off button
USB port
Power connection
Anti-glare cap
Battery pack 2
3. Tasks to be done before using blue:tron
· Check if all parts were delivered
light curing device I charging cable I red anti-glare cap I safety glasses
· Check blue:tron
® for any mechanical damage
· Fully charge the battery as follows
Step 1: Insert the output connector of the power adapter into the port on the underside of the device.
Step 2: Plug the power adapter into a power outlet.
Step 3: Fully charge the battery pack for about 3 to 5 hours or until the charging bar indicates a full charge and stops flashing.
Note!
The battery charge level is shown on the device display.
®
8 | invicon blue:tron
Charging cable
3 high-performance LEDs
for the first time
®
Safety glasses