Kärcher RCV 5 Manual De Instrucciones página 20

Switching off the cleaning robot
Note
The cleaning robot cannot be switched off when it is on
the charging station.
Note
Fully charge the cleaning robot before longer work inter-
ruptions.
ATTENTION
Damage due to moisture
Remove the wiper cloth with the wiper cloth holder, see
chapter Removing the wiper cloth holder.
To remove the water reservoir, see chapter Removing
the water reservoir.
1. Keep the On/Off button pressed when the cleaning
robot is in standby and not on the charging station.
The cleaning robot switches off.
Interrupting cleaning
1. Press any button during cleaning.
The cleaning robot stops.
2. Press the On/Off button.
Cleaning continues.
3. Press the "Return to charging station" button.
Cleaning is cancelled and the cleaning robot returns
to the charging station.
Manually sending the cleaning robot for
recharging
1. If the cleaning robot is moving, press any button.
The cleaning robot stops.
2. Press the "Return to charging station" button.
The cleaning robot moves to the charging station for
recharging.
The cleaning robot automatically returns to the charging
station for recharging when it has completed a cleaning
task or when it is low on energy during a cleaning pro-
cess.
Dry wipe
1. Empty the dust container if necessary, see chapter
Emptying the dust container.
2. Insert the dry wiper cloth into the wiper cloth holder,
see chapter Installing the wiper cloth.
3. Press the On/Off button.
The cleaning robot starts cleaning.
Wet wipe
Note
After emptying the water reservoir, drops may remain in
the hoses. If the cleaning robot is started with an empty
water reservoir, these drops can be discharged.
ATTENTION
Damage to the water reservoir due to corrosion and
chemical content materials
Do not put detergents, disinfectants or other cleaning
products in the water reservoir.
Do not pour hot water into the water reservoir.
Do not immerse the water reservoir in water.
Dry the metal contacts of the water reservoir before in-
serting the water reservoir.
1. Press any button.
The cleaning robot stops.
2. Remove the water reservoir, see chapter Removing
the water reservoir.
3. Fill with water.
Illustration M
a Open the water reservoir lid.
b Fill the water reservoir.
20
c Close the water reservoir lid.
4. Push the water reservoir into position until it audibly
latches into place.
Illustration G
5. Dampen the wiper cloth under running water and
wring out to remove excess water.
6. Install the wiper cloth holder, see chapter Installing
the wiper cloth holder.
7. Install the wiper cloth, see chapter Installing the wip-
er cloth.
8. Press the On/Off button.
The cleaning robot starts cleaning.
1. Press any button.
The cleaning robot stops.
2. Remove the water reservoir, see chapter Removing
the water reservoir.
3. Fill with water.
Illustration M
a Open the water reservoir lid.
b Fill the water reservoir.
c Close the water reservoir lid.
4. Push the water reservoir horizontally into the clean-
ing robot until it audibly latches into place.
Illustration G
5. Press the On/Off button.
Cleaning continues.
Draining the water reservoir
1. Press any button.
The cleaning robot stops.
2. Remove the water reservoir, see chapter Removing
the water reservoir.
3. Open the water reservoir lid.
4. Turn the water reservoir upside down and empty the
water from the opening.
Illustration O
5. Push the water reservoir horizontally into the clean-
ing robot until it audibly latches into place.
Illustration G
6. Press the On/Off button.
Cleaning continues.
Emptying the dust container
1. Press any button.
The cleaning robot stops.
2. Remove the dust container see chapter Removing
the dust container.
3. Empty the dust container.
Illustration N
a Open the filter flap.
b Remove the filter flap.
c Empty the dust container.
d Fit the filter flap.
e Close the filter flap.
4. Install the dust container, see chapter Installing the
dust container.
5. Press the On/Off button.
Cleaning continues.
Cleaning the wiper cloth
The wiper cloth can be cleaned during a cleaning pro-
cess.
1. Press any button.
The cleaning robot stops.
2. Remove the wiper cloth, see chapter Removing the
wiper cloth.
3. Clean the wiper cloth.
English
Refilling water