3 Symbols on the Battery System
• Do not attempt to open, disassemble, repair, tamper with, or modify the battery modules. The
battery modules are not user-serviceable.
• Do not use cleaning solvents to clean the battery modules.
2.2.4. Notice of Property Damage
If the battery system doesn't start at all, please contact BYD authorized service partner within 48
hours. Otherwise, the battery could be permanently damaged.
When the system is installed, it needs to be able to charge and discharge to avoid a deep discharge
condition. After the installation, this needs to be checked once a month. If the battery system is not
working normally, please get in contact with your local service partner.
During the storage of the battery system, please mind the maximum storage time.
2.2.5. Surge Protection
Overvoltages (e. g. in the event of a flash of lightning) can be further conducted into the building and
to other connected devices in the same network via the network cables or other data cables if there
is no surge protection.
Ensure that the system is integrated into the existing surge protection.
2.2.6. Safety Information of the Inverter Manufacturer
Please read and observe all safety information of the inverter manufacturer.
3. Symbols on the Battery System
Symbol
Explanation
Observe the documents
Observe all documents supplied with the system.
Grounding conductor
This symbol indicates the position for connecting a grounding
conductor.
Disposal
Do not dispose of the system together with household waste,
please contact BYD service partner (contact information at the
end of this document) to dispose of it in accordance with regulations
for electronic waste and used batteries.
CE marking
The system complies with the requirements of the applicable EU
directives.
Place it straight up, without inclination or upside down.
Handle with care
4
Shenzhen BYD Electronic Co., LTD