Publicidad
Vegas 12
IMPORTANT SAFETY SYMBOLS
The symbol is used to indicate that some hazardous live terminals are involved
within this apparatus, even under the normal operating conditions, which may be
sufficient to constitute the risk of electric shock or death.
The symbol is used in the service documentation to indicate that specific
component shall be replaced only by the component specified in that documen-
tation for safety reasons.
Protective grounding terminal
Alternating current/voltage
Hazardous live terminal
ON: Denotes the apparatus is turned on.
OFF: Denotes the apparatus is turned off.
WARNING: Describes precautions that should be observed to prevent the danger of injury or
death to the operator.
CAUTION: Describes precautions that should be observed to prevent danger of the
apparatus.
IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions.
• Keep these instructions.
• Heed all warning.
• Follow all instructions.
• Water & Moisture
The apparatus should be protected from moisture and rain, can not used near water, for
example: near bath- tub, kitchen sink or a swimming pool, etc.
• Heat
The apparatus should be located away from the heat source such as radiators, stoves or
other appliances that produce heat.
• Ventilation
Do not block areas of ventilation opening. Failure to do could result in fire. Always install
accordance with the manufacturer's instructions.
• Object and Liquid Entry
Objects do not fall into and liquids are not spilled into the inside of the apparatus for safety.
• Power Cord and Plug
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong is provided for your safety.
If the provided plug does not fit into your outlet, refer to electrician for replacement.
•Power Supply
The apparatus should be connected to the power supply only of the type as marked on the
1
CAUTION
7. Ecualizador de 2 bandas
Agudos: este potenciómetro se utiliza para ajustar la salida de volumen de baja frecuencia
Bajo: este potenciómetro se utiliza para ajustar la salida de volumen de alta frecuencia
8. Indicador de límite y potencia
Indicador de límite: cuando la potencia es demasiado, límite. El indicador se iluminará, baje
el volumen
Indicador de encendido: encienda la máquina, el indicador de encendido estará
encendido
9. Interruptor led.
Enciende/apaga la iluminación RGB en el frente.
10. Interruptor de encendido
Encender/apagar la máquina.
11. Toma de CA y portafusibles
Utilice el cable de alimentación correcto para obtener el voltaje correcto de la fuente de
alimentación de CA.
Reemplace el fusible con la especificación correcta cuando el fusible esté roto en el
portafusibles.
12. instrucción MP3
(1) Modo
Presione el botón Modo para elegir los modos de trabajo en el reproductor de mp3 como
USB/SD/FM/Bluetooth
(2) Reproducir/Pausar
Presione este botón para reproducir el reproductor de mp3 o pa usar el reproductor de
mp3, cuando el reproductor de mp3 funcione en modo FM,
presione este botón para escanear las estaciones automáticamente.
(3) Detener
Presione este botón para detener el reproductor de mp3.
(4) reciclar
Presione este botón para reproducir música reciclada.
(5) Hacia atrás
Presione este botón para reproducir la última canción o buscar la última estación FM.
(6) Adelante
Presione este botón para reproducir la siguiente canción o buscar la siguiente estación de
FM.
USER´S
MANUAL
MANUAL
DE USUARIO
2
Publicidad
