Kinderkraft EVOLUTION COCOON Manual De Usuario página 13

IMPORTANT - READ CAREFULLY AND KEEP FOR FUTURE
REFERENCE.
Safety and care notes
WARNING!
• Never leave the child unattended.
• Ensure that all the locking devices are engaged before use.
• To avoid injury ensure that the child is kept away when
unfolding and folding this product.
• Do not let the child play with this product.
• Check that the pram body or seat unit or car seat attachment
devices are correctly engaged before use.
• Use only parts and accessories supplied or recommended by the manufacturer. Do not use other parts or accessories.
• Do not place the product near open flame or other heat sources.
Applies for car seats adapters
•
Adapters are intended to assembly the car seats on the EVOLUTION COCOON pram frame Adapters can be used
with baby car seats with max. weight of 13 kg.
•
If the seat is used with the pram it shall not replace a cradle or bed. If your baby needs sleep, take it to carrycot,
cradle or bed.
I LIST OF PARTS
Top right adapter (1) Bottom right adapter (2)
Top left adapter (3) Bottom left adapter (4)
II ASSEMBLY OF ADAPTERS AND CAR SEAT
First remove the seat from the frame of the pram. Lift the lever on top of the backrest and adjust the backrest towards
the seat until the grey straps form a line (Fig. A). Mount the lower part of the adapters on the frame of the pram, make
sure to position the adapters correctly as shown in fig B. The adapters are marked with "L" left and "R" right. When
correctly assembled, you will hear a characteristic click. Then place the upper part of the right adapter on the lower part
of the right adapter and the upper part of the left adapter on the lower part of the left adapter (Fig. C). Push the car
seat onto the adapters (Fig.D) and make sure the car seat's attachment system locks onto the adapters. To remove the
seat and the adapters, do the following in reverse order - remove the seat, according to the car seat instruction manual,
release both parts of the adapters by pressing the buttons on the adapters. Then slide the seat onto the frame, making
sure the grey straps are correctly positioned (Fig.E).
WARNING! The seat on the frame must always be placed rearward facing (with the child facing the person pushing
the pram).
The adapters are designed exclusively for the Kinderkraft Evolution Cocoon to connect with car seats for children up to
13 kg. The adapters are compatible with the car seats: : Kinderkraft®, Kiddy®, Maxi Cosi®, Cybex®, BeSafe®, Nuna® and
the following product versions : Kinderkraft MINK, Kiddy Evoluna I-Size 2, Evolution Pro 2, Cybex Aton, Aton 2, Aton Q,
Maxi Cosi Mico, Mico AP, Mico NXT, Mico Max 30, Citi, Cabrio, CabrioFix, BeSafe iZi Go, iZi Go Modular, Nuna Pipa.III
WARRANTY
1. All Kinderkraft products are covered by a 24-month warranty. The warranty period starts from the date the product
is handed over to the Buyer.
2. The warranty is only valid in the member states of the European Union, excluding overseas territories (as currently
defined, including in particular: Azores, Madeira, Canary Islands, French Overseas Departments, Åland Islands, Athos,
Ceuta, Melilla, Helgoland, Büsingen am Hochrhein, Campione d'Italia and Livigno) and the territory of the United
Kingdom of Great Britain and Northern Ireland excluding the British Overseas Territories (e.g. Bermuda, Cayman
Islands, Falkland Islands).
3. The manufacturer's warranty does not apply to countries not listed above. The conditions of the additional warranty
may be determined by the Seller.
13