INSTRUCTIONS
Using Your Air Fryer
1. Connect the mains plug to a suitably earthed 220-240V~50/60Hz wall socket
2. Your Air Fryer will beep and "---" will be displayed, the unit will be in standby
mode.
3. Press the power button, the Fryer will turn on and display the default pre-heat
settings "180°C" and "15m" this can be manually changed for your requirements
4. Press the Temperature "+" or "-" button to select the required cooking
Temperature.
5. Press the Time "-" button to select 3min for pre-heating.
6. Press the Power button to start cooking.
7. When the time counts down to "0" and the finish beep sounds, carefully pull the pot
out of the Air Fryer. It is advisable to place one hand on the top of the Air
Fryer while you do this.
8. Place the ingredients into the basket.
Note: Never fill the basket exceeding the MAX line indicated in the Fry Basket, as this
could affect the quality of the end result.
9. Slide the pot back into the Air Fryer.
NOTE: Never use the pot without the basket in it.
WARNING:
Do not touch the pot during and for a while after use, as it gets very hot. Only hold the
pot by the handle.
10. Press the "M" mode button to select the pre-set cooking program. Each sequential
press of the button changes the program. Alternatively the "+" and "-" buttons can be
used for individual preference.
11. Press the Power button to start cooking.
12. When the cooking time finishes, the unit will "Beep", and the display will turn off.
The air fryer will turn to standby mode automatically.
Removing the cooking basket:
You can remove the cooking basket if required
WARNING! This product is designed so that you cannot press the release button while
the pot is in the air fryer. Never press the Basket Release Button unless you have
placed the pot on a flat, stable and heat resistant surface.
WARNING! Do not touch the Cooking pot during cooking or for some time after use, as
it gets very hot and may cause burns. Only hold the Cooking pot by the Handle using a
suitable cloth or Oven Glove.
NOTE:
l
If the start button is not pressed in 1 min the hot air fryer will switch into its standby
mode.
l
Time and Temp can be adjusted during the cooking cycle by pressing the appropriate
buttons.
l
Add some oil on the ingredients for a crispy result.