Worx WX009 Manual De Instrucciones página 10

Mode 3
Install the battery pack and connect
the speaker to the mains via AC power
transformer.
In this mode, the speaker can be used
to play audio and at the same time
be used to charge battery pack(See
Fig. D3).
OPERATION
Playing Audio
Mode 1
1. Press the on/off button for 2
seconds to turn on the speaker and
the power indicator will become lit.
Check Bluetooth function of your
audio device and turn on the
Bluetooth of the device.
2. Find the speaker Bluetooth name
on the Bluetooth list of your audio
device and get paired with it.
If the speaker bluetooth name cannot
be found, press the Bluetooth button
for 2 seconds and the Bluetooth
indicator will blink. Find the speaker
Bluetooth name and get paired with
it, then the Bluetooth indicator will
10
become lit.
3. Play the audio.
4. Press the pause button to pause
or play.
5. Stop audio palying through your
audio device.
NOTE: Turn off the Bluetooth on your
audio device or delete the speaker
Bluetooth name on the Bluetooth
list of the audio device to stop the
Bluetooth connection.
NOTE: Keep the speaker Bluetooth on
and if the Bluetooth device has been
previously paired once, the Bluetooth
device can be automatically paired
to the speaker when you turn on the
speaker.
20V Cordless Bluetooth Speaker
Mode 2
1. Press the on/off button for 2
seconds to turn on the speaker and
the power indicator will become lit.
2. With the AUX-in socket, the
speaker can be connected to the
audio device. (The AUX cable is not
included in standard delivery.)
3. Play the audio.
NOTE: In this mode, no Bluetooth
connection can be made, and
Bluetooth connection can only be
made after exiting the Aux mode.
NOTE: Speaker will automatically shut down if no
audio is played for 30 minutes after it is turned
on.
AFTER OPERATION
Press the on/off button for 2
seconds to turn off the speaker.
Remove the battery pack (See Fig.
B3) and/or the AC power transformer.
NOTE: Press the battery unlock
button when removing the battery
pack.
Adjusting Volume
See Fig. B1
Adjust the volume by pressing the
volume adjustment button "+" /"-".
NOTE: When the battery pack is used for power
supply and the battery pack power is low, the
power indicator blinks quickly, and the speaker will
automatically shut down after the prompt tone.
USE AS A CHARGER
With a USB power port, the speaker can be
connected to charge different kinds of devices,
such as phones, tablets, etc..
NOTE: The charging cable is not included in
standard delivery.
NOTE: The USB power port is NOT designed to play
audio files on audio device.
NOTE: Please keep the speaker powered on when it
is used as a charger.
Mode 1
Connect the device to the speaker and
install the battery pack.
Turn on the speaker and the speaker
starts to charge the device.
NOTE: Charge the battery pack
before installing the battery pack to
the speaker. When the battery pack
voltage drops to the point of under
voltage protection, the speaker will
stop charging.
See Fig. B2
See Fig. C
See Fig. D1
EN