Publicidad
Idiomas disponibles
Idiomas disponibles
User's manual · WB1-11-OCPP-LK7 & WB1-11-OCPP-
Note: If your charger is with PEN protection function, please connect the wires as follow.
5 Configuration and Operation
5.1 Power-on Checking
1. Checks before Power-on
Please check/re-check the following items prior to initial Power-on :
•
The charger's location allows good operational access to normal use and repair &
maintenance.
•
The AC input components within the premise's power supply are fitted correctly with
required protection items prior to installation of the charger.
•
Double confirm the charger is installed properly.
•
No components or other items have been left on the top of the charger.
Power-on status checking
1)
Power-on the charger, the LED indicator should be in standby status.
State
Standby
Ready to charge
Charging in progress
Fault has occurred
Configure the internet
2)
Download ChargeIn APP in APP Store/Google Play or scan the QR code.
1.
Follow the steps of configure to connect the charger to internet.
2.
Technical changes and mistakes reserve
User's manual · U+ WB1-7-OCPP-LK7 / U+ WB1-11-OCPP-LK7
Description
Power-on, but no gun plug-in
Gun plugged in, but not yet started charging
Gun plugged in, charging in progress
An error condition has occurred; See
Section 6 (Troubleshooting) for details of
error conditions
-7- u+
User's manual · WB1-11-OCPP
Flashing green, 1second on; 3 seconds
Flashing red or constantly red
WB1-7-OCPP-LK7 / U+ WB111-OCPP-LK7 Versión en_1.0 Univers by FTE
LED Status
off
Constantly green
Breathing green, 1second on;
1second off
Publicidad
