Vortice CB LCD W Ariasalus Manual De Instrucciones página 22

ENGLISH
Factory default values reset
Press and simultaneously for
about 2 seconds until the light is
switched off, which means the system
has reset to factory default values.
Reset must be performed with the
device connected to the power supply.
Perform the reset procedure again if
the device is disconnected.
Electrical connections
Connections must
respecting the correspondence
between the colours of the
terminals and cables coming from
the device (fig.11).
Note: connections must be made
in accordance with the wiring diagram.
22
10
be made
MON TUE WED THU FRI SAT SUN
UV
SET
11
CB LC W ARIASALUS
VORTICE S.p.A
Strada Cerca 2, 20067
Tribiano,frazione di Zoate(Mi)
AC85~250, 50/60Hz, 0T45
N
=blue
OG= orange VT= violet BK= black
L= brown
°
C
AUTO
VORTICE S.p.A
Strada Cerca 2, 20067
Tribiano,frazione di Zoate(Mi)
AC85~250, 50/60Hz, 0T45
PK= pink GY= grey