Reolink REO DEURBEL POE Guia De Inicio Rapido página 6

Step 3 Run the Ethernet cable through the mounting plate and attach the
doorbell to the plate.
NOTE: If you're using the Reolink Video Doorbell WiFi, you need to run
the power wires through the mounting plate.
9 English
1
1
2
2
If you need to adjust the angle of the doorbell, you can use the wedge
provided.
Step 1 Put the mounting hole template on the wall and drill holes as shown.
Step 2 Install the wedge using the screws provided through the two holes.
Step 3 Screw the mounting plate to the wedge.
Step 4 Run the Ethernet cable through the wedge and mounting plate,
and attach the doorbell to the plate.
English 10