Introduction; Features; Sold Separately; Operation - Phonic PCT-3000 Manual Del Usuario

Introduction

Congratulations on your purchase of the all new Phonic
PCT-3000 dual channel wideband wireless receiver or the
complete PCT-3000SYS wireless microphone system. The
culmination of years of working in the wireless domain, the
PCT-3000 combines the tried and true wireless technology
that Phonic is famous for with a brand new stand-alone
construct. The PCT-3000 systems were built to deliver
superb RF reliability and transparent audio performance
in a wide variety of professional applications, even under
the harshest conditions. Ideal for live stage performances,
speeches, karaoke and more, the PCT-3000 wireless
systems ensure you never have to worry about microphone
cables again.

Features

• Run up to 48 microphones interference-free in a single
venue, maximum 10 channels per group at a time
• 29 preset channel groups plus 1 user-defined group,
Groups 1 to 8 offer 10 Channels per group while Groups
9 to 29 offer 16 channels (432 frequencies in total)
• Clear display offers frequency information for ultimate
control over transmission
• Rapid auto-scan syncing with transmitters for easy,
immediate operation
• Balanced and unbalanced output through XLR and ¼"
TRS phone jacks
• Advanced diversity circuitry helps to improve stability
and avoid dropouts
• Broad channel range makes multiple systems ideal for
use at any one time
• Rear-panel -10, 0, +6 dB switch for contouring level to
input devices
• Stable performance even in the event that multiple units
or channels are used
• Flexible noise squelch technology for clear, noise-free
performances every time
• Detachable diversity antennas for flexible setup and
installation
• Transmitters feature LCD screens with battery and
frequency monitoring/control
• Perfect for Karaoke (KTV) bars and live stage
performances
PCT-3000SYS
• PCT-3000SYS includes a single PCT-3000 receiver in
addition to two WM-X handheld microphone transmitters

Sold Separately

• WL-X Wireless Lavalier Microphone with Bodypack
Transmitter
• WH-X Wireless Headset Microphone with Bodypack
Transmitter
PCT-3000

Operation

Auto Scan
1. Power on the PCT-3000 wireless receiver by flicking the
power switch found on the rear of the device.
2. Power on your WM-X handheld microphone by pushing
and holding the power button.
3. Hold the WM-X transmitter close to the PCT-3000
receiver with the IR port on each facing each other
(within 30cm).
4. Push and hold the PCT-3000's MENU button for 3
seconds to enter the configuration mode. Push the
MENU button repeatedly until the lock is blinking. Push
and hold the channel's UP button to initiate autoscan.
5. Upon a successful connection, the RF meter on the
PCT-3000 will fill up and the AF meter will light up as
you speak into the microphone.
Manual Group Setting
1. Power-on PCT-3000 receiver and the microphone
transmitter.
2. Push and hold the menu button on the PCT-3000
receiver for 3 seconds. Pushing the menu button again
will scroll through the PCT-3000's on screen functions.
3. When the Group section is highlighted, push the up and
down buttons to adjust the value. Push menu again to
move to the Channel option and change the selected
channel.
4. When the lock symbol is flashing, push and hold the
DOWN button to initiate the transfer to the WM-X
receiver.
5. Push and hold the menu button to save your settings
and exit configuration mode.
6. Alternatively, on the WM-X transmitter, push and hold
the UP button to enter edit mode. You can then push
the up and down buttons to adjust the "GROUP"
used. Push and hold the UP button again to adjust the
"FREQUENCY". These must match the GROUP and
FREQUENCY numbers set in the receiver.
<30cm
1