Power Linking; Floor Mounting - Chauvet Professional ROGUE OUTCAST 1L BEAM Guía De Referencia Rápida

AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.

Power Linking

It is possible to power link Rogue Outcast 1L Beam products. See the table below for the current draw at each voltage
and frequency:
Current Draw
Never exceed 12A on a single circuit. Power-linking cables can be purchased separately.
Mounting
Before mounting this product, read the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/.
Mounting Diagram
Safety cable
Overhead mounting
Control Panel Description
Button Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
<UP> Navigates upwards through the menu list or increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list or decreases the numeric value when in a function
Rogue Outcast 1L Beam QRG Rev. 1
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
100 V, 60 Hz 120 V, 60 Hz
2.45 A 2.08 A
Safety Notes. Use at least two mounting points per product. Make sure the
Mounting clamp
Wire (Europe)
Green/Yellow
208 V, 60 Hz
1.15 A
Omega bracket
Brown
Blue
230 V, 50 Hz
1.04 A

Floor mounting

EN
Screw Color
Yellow/Brass
Silver
Green
240 V, 50 Hz
1.01 A
2