Wurth Master AL 60-CL Instrucciones Para El Manejo página 7

AL 60-CL.book Seite 7 Donnerstag, 18. November 2004 3:50 15
A NiCd battery does not reach its full capacity until after
several charging-/discharging cycles.
NOTE: The battery gets hot in continuous use. Allow the
battery to cool down for approx. 60 minutes before
recharging.
Indication Red Green Meaning
LED 5 LED 4
OFF OFF Ready for charging, no battery inserted.
FAST ON OFF Rapid charging active.
TRICKLE OFF ON Trickle charging active.
OFF ON Battery to hot
Battery faulty
* When mains voltage is given and no LED lights up after inserting the battery, send the battery charger together with the
battery to your customer service agent for Würth power tools. Make sure to remove the battery from the battery charger,
and do not test any further batteries. A defective battery charger can damage the battery.
Maintenance and Cleaning
If the machine should happen to fail despite the care
taken in manufacture and testing, repair should be car-
ried out by an authorized customer service agent for
Würth power tools.
For all correspondence and spare parts orders, always
include the article number on the type plate of the
machine.
Warranty
For this Würth machine, we provide a warranty in
accordance with statutory/country-specific regulations
from the date of purchase (proof of purchase by invoice
or delivery note). Damage that has occurred will be cor-
rected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the warranty.
Claims can only be accepted if the device is sent undis-
assembled to a Würth branch office, your Würth sales
representative or a customer service agent for Würth
power tools.
The charging time for a partially discharged battery is
approx. 20 minutes and for an empty battery approx.
60 minutes. During charging, the battery warms up.
This is normal and not a malfunction.
When the battery is fully charged, pull the plug of the
charger out of the socket outlet and remove the bat-
tery. Do not store the battery in the unplugged charg-
er.
Indicators and Fault Finding
recycling.
Defective or worn out batterie packs must be recycled
according to the guidelines 91/157/EEC.
Do not open the machine or batterie packs! Dispose
of the batterie packs and machine by means of the
collection facilities provided
Subject to change without notice
Remedy
Insert battery.
The charge procedure of a 2.0 Ah battery
is finished after no later than 60 minutes.
The charger switches to trickle charging.
Battery can be kept in the plugged-in charger.
Let battery cool down.
Battery or charger defective; check charger and
battery by a customer service agent for Würth
power tools
Environmental Protection
Recycle raw materials instead of disposing
as waste.
The machine, accessories and packaging
should be sorted for environmental-friendly
Do not throw the battery
pack into the household
waste, into fire or water.
.
7