AENO AP4 Manual Del Usuario página 8

ENG The AENO AP4 Air Purifier is designed to disinfect and clean indoor air
from allergens, pollen, fungal spores, dust particles, smoke, animal hair, and
unpleasant odors.
Specifications
Supply voltage: DC 12 V, 2 A. Rated power: 24 W. Power adapter input voltage:
AC 100–240V, 50/60 Hz. Air flow rate: 200 m 3 /h. Noise level: in the night mode
22 dB (at a distance of 1m). Coverage: Up to 35 m 2 . Indoor air purification time:
0,5 hours. Net weight: 2.1 kg. Dimensions: Ø205 mm × 385 mm.
Package Contents
AENO AP4 Air Purifier (See Figure a), power adapter, HEPA filter, quick start
guide, warranty card.
Limitations and Warnings
ATTENTION! The device is equipped with a built-in UV lamp. It is not allowed
to disassemble the device and turn it on when disassembled, because it may
be very harmful to eyes.
Make sure the purifier is unplugged before maintenance. Do not immerse the
purifier in water or any other liquid. Do not use aggressive and flammable
chlorine- or alcohol-containing agents to clean the purifier. Use the device as
described in this Quick Start Guide and the complete User Manual only. Failure
to follow the instructions may result in fire and other hazardous situations, as
well as injuries. Do not use the device if it is damaged or cracked. Do not install
the device outdoors or near sources of water, including humidifiers. Do not
expose the device to direct sunlight, moisture or vibration. Do not drop, throw,
disassemble the device, or try to repair it on your own. Do not lay the power
cable near radiators, stoves, or heaters. Do not use cleaning agents or
detergents to clean the device. Do not dispose of the device with unsorted
urban waste, because this will be harmful for the environment. For more
8 aeno.com/documents