PNI Escort HP 82 Manual De Usuario página 11

English
Press ▲ or ▼ to change the setting:
On - roger beep enabled (the icon appears on the screen)
Off - roger beep disabled (the icon disappears from the screen)
TOT (Timeout timer)
Turn off the CB radio.
Hold down the AM/FM/BAND key [16] while restarting the CB radio.
"150 TIME OUT TIMER" appears on the screen. Use the ▲ or ▼ keys
to set the maximum continuous transmission time.
Reset
With the CB radio turned off, hold down the SQ/ASQ [14] key while
turning back on the radio. The message Rest Default and the firmware
version will be displayed on the screen.
After the reset, the CB radio returns to the factory settings.
Standard selection
Long press the AM/FM/BAND [16] key. The icon corresponding to
the current standard blinks on the screen.
Press the ▲ or ▼ key to change the standard.
Short press AM/FM/BAND to save and exit or wait 5 seconds.
Check the Bands and frequency table at the end of this manual.
11