Lister 9.03B Instrucciones De Uso página 23

3 Touch the Earth Stake with the tester.
a. If it reads over 400 volts it's not working properly
b. Add additional earth stakes at least 1m apart
c. Connect the earth stakes with under gate cable
Maintenance
Test the fence
•
Put the testers earth in the ground
•
Touch the fence with the testers pin
•
Check connections
•
Minimum Voltage should be 4,000 volts
The Power in the electric fence is dependent on
the connections making good contact.
Also any vegetation touching the fence will take
away the power.
It is necessary to check the fence regularly to
ensure no branches, bushes etc. are touching
the fence
EN
23