Publicidad
Idiomas disponibles
Idiomas disponibles
GB
The on button extends the turn-off time;
the off button reduces it.
The green LED displays:
Pressing the on and off button at the same time again for 3 s saves the
turn-off time. The LED briefly flashes to confirm this.
ITW-802: Each channel can be assigned its own turn-off time.
This means that two receivers can turn off at different times.
However, it is also possible for a receiver that has learned both codes
to be assigned a short or long turn-off time (for example, button 1 = 10
min., button 2 = 60 min.).
Mounting
Easy to install mounting plate.
The mounting plate is easy to affix on glass, wood, wallpaper or tiles, etc.
Double-sided adhesive tape and screws are included.
Caution: Avoid shielding through metal objects.
Operation
To turn on: Press on (top) once. The LED will briefly light up green.
To turn off: Press off (bottom) once. The LED will briefly light up red
two times.
Dimming:
1.) Start the dimming cycle by pressing the on signal again and stop
the dimming or brightening at the desired brightness with the on
signal.
Or
2.) Keep the on (brighter) or off (dimmer) button pressed to dim or
brighten the device until the desired brightness is reached, then
release it to stop.
Operating instructions
0
– 1x lighting up of the LED
5 s
– 2x
1 min.
– 3x
10 min. – 4x
30 min. – 5x
60 min. – 6x
ITW-801
ITW-802
›
Publicidad
