After Use - Withings BPM Connect Manual De Instrucciones

After use

Cleaning
- Do not use an alcoholic-base or solvent agent to clean
the device
- Clean the device with a soft and dry cloth
- The dirt on the cuff can be cleaned by a moisten cloth
and soap
- Do not flush the device and cuff with much water
- Do not dismantle the device or disconnect the cuff or try
to repair by yourself. If any problem happens, refer to the
distributor
- Do not operate the device under severe environment of
extreme temperature or humidity, or direct sunshine
- Do not shake the unit violently
- Do not submerge the device or any of the components
in water
- Do not let the device under strong shocks, such as
dropping the unit on the floor
Storage
- Store the device and the components in a clean and safe
location
- If storage conditions are different from the usage
conditions indicated in this document, please wait 30
minutes before taking a measurement.
Maintenance
If you can't fix the problems using the troubleshooting
instructions , request service from your dealer.
Manufacturer will make available on requested circuit
diagrams, component part lists, descriptions, calibration
instructions, or other information that will assist
manufacturer's staff or authorized representative for repair.
It is generally recommended to have the device inspected
every 2 years, to ensure proper functioning and accuracy.
Do not use the device while doing maintenance steps.
14