Publicidad
Idiomas disponibles
Idiomas disponibles
Pairing mode
Connected to a device (Successfully
paired with your media device).
The headset will automatically be paired with your last successfully connected media device the next
time it is turned on.
Case 2: If your headset has been paired before and you want to pair it with a different device:
1. Press and hold the power button for 6 seconds until the LED indicator alternately flashes blue and red.
2. Turn on Bluetooth in your device's settings and search for "BT4500", then tap "BT4500" to connect.
Connection with two devices
This headset can be seamlessly connected to two different devices at once, allowing you to take calls from two
phones without switching back and forth.
Case 1: If your headset has never been paired:
1. Press and hold the power button for 1 second to turn on the headset. The indicator will alternately flash blue
and red.
2. Tap "BT4500" from the Bluetooth device list on Phone 1 to connect.
3. After it is successfully connected, proceed to disconnect it from the headset. Then turn off the headset, and
press and hold its power button for 6 seconds until it alternately flashes blue and red.
4. Tap "BT4500" from the Bluetooth device list on your Phone 2 to connect.
5. After it is successfully connected, tap the headset's name on Phone 1 again to connect. Now the
connected to both of your phones.
Case 2: If your headset has been paired before, but not with either of these devices:
1. Press and hold the power button for 6 seconds until the indicator alternately flashes blue and red.
2. Repeat from step 2 to step 5 in Case 1.
Case 3: If your headset has been paired with both devices:
1. Press and hold the power button for 1 second to turn on the headset. It will automatically be paired with either
one of your phone.
2. Tap "BT4500" from the Bluetooth device list on the other phone to connect.
Case 4: If your headset has been paired with one device, but not both:
1. Press and hold the power button for 6 seconds until the indicator alternately flashes blue and red.
2. Tap "BT4500" from the Bluetooth device list on Phone 2 to connect.
3. Tap the
headset
name again on Phone 1 to connect. Now the
To clear the Bluetooth paired device memory, ensure that the headset is powered on but not paired with
any devices. Press and hold the Power Button and Microphone Mute button at the same time until the
LED indicator alternately flashes blue and red twice.
Alternately flashing red and blue
Flashing blue once every 10 seconds
Connected tone notification
headset
EN 3
is connected to both of your phones.
headset
is
Publicidad
