Eltax apt X Monitor III BT Manual Del Usuario página 7

AUX1 LEVEL
PHONO LINE
STEP 1
Connect the RED (+) and BLACK (-) terminals from the left speaker to the corresponding terminals on
the right speaker using the included speaker cable.
Note: Because this system is self-powered, do not connect the speaker terminals to the speaker
outputs of a stereo receiver.
STEP 2
Connect the power cord into the left speaker and the other end into the wall outlet.
If you have a Bluetooth audio device, such as smartphone, music player, computer and wants to
connect it with Monitor III BT Powered speakers, you should pair them as below :
1. Power ON :
• Monitor III BT Powered speakers
• Bluetooth function on your Bluetooth audio device.
2. Select Bluetooth input with the remote control, the white LED will be flashing slowly :
• if not, another Bluetooth audio device is already connected.
Please disconnect it by shutting down its Bluetooth function
• Now press the " " button, the Bluetooth goes into pairing state, that means now
the Monitor III BT goes into detectable state, the white LED will flash quickly,
this state will last for 2min.
3. Please use your Bluetooth device, search new Bluetooth devices, find "Monitor III BT ",
and connect with it. If pairing code is needed use "1234" or "0000".
4. If pairing successfully, white LED will stay solid.
5. If using a previously paired Bluetooth audio device, there is no need to do pairing again.
CONNeCTINg yOuR sPeakeRs
GND
Powered bluetooth speaker
BlueTOOTh fuNCTION
UK