1. SAFETY WARNINGS
ො Do not look directly at the LED or point the light beam directly into
the eyes of people or animals. ATTENTION: Looking at LEDs for a
long time can cause irreversible damage to the retina of the eye.
ො Do not use or touch the device with wet hands.
ො Only for lighting for photographic purposes. Not suitable for perma-
nent room lighting.
ො Keep the LED light away from easily flammable materials.
ො Provide adequate ventilation during operation. Never cover the ven-
tilation slots of the device.
ො Use the device only from the supplied power supply. Do not use an
extension cord. Make sure that no one can trip over the cable con-
nections.
ො To avoid tilting the LED light, align the LED light on a wide leg of the
tripod.
ො Make sure the light stand is on a flat, dry surface.
ො Always let the LED light cool completely before doing any installa-
tion.
ො Protect the device from rain, moisture, direct sunlight, and extreme
temperatures.
ො Protect the device from impacts. Do not use the device if it has been
dropped. In this case, have it checked by a qualified electrician be-
fore turning the device back on.
ො If the device is defective or damaged, do not try to disassemble or
repair the device yourself, there is a risk of electric shock. Contact
your specialist dealer.
ො People with physical or cognitive disabilities should use the device
under guidance and supervision.
ො People with pacemakers, defibrillators, or other electrical implants
should keep a minimum distance of 30 cm, as the device generates
magnetic fields.
ො After each use, turn off the device at the main switch and disconnect
the power supply.
ො The device is not a toy. To avoid accidents and suffocation, keep the
device, accessories, and packaging materials out of the reach of
children and pets.