Dress properly
-
Rubber gloves and non-skid footwear are
recommended when working outdoors. Wear
protective hair covering to contain long hair. Use
safety glasses.
-
Use a mask if working operations are dusty.
Don't abuse cord
-
Never carry tool by cord or yank it to disconnect
it from socket.
-
Keep cord from heat, oil and sharp edges.
Avoid unsteady positions
-
Be sure to work in a safe and balanced position.
Maintain tools with care
-
Keep tools sharp and clean for better and safer
performance.
- Follow all maintenance advice and instructions
to replace accessories subject to wear. Inspect
tool cords periodically and, if damaged, have
them repaired by an authorised expert. Check
extension cords periodically and replace them
if damaged. Keep handles dry, clean and free
from oil and grease.
Disconnect tools
-
When not in use, before servicing, and when
changing accessories subject to wear.
Remove service keys from tool
-
Form the habit of checking to see that keys
and adjusting wrenches are removed from tool
before turning it on.
Avoid unintentional starting
-
Be sure that the switch is off when plugging in
the tool.
Extension cords for outdoor works
-
When tool is used outdoors, use only extension
cords intended for this particular use and so
marked.
Stay alert
-
Watch what you are doing. Use common sense.
Do not operate tool when you are inattentive.
Check tool for damaged parts
-
Before further use of the tool, check it and the
safety devices for damages and be sure that
they operate properly. Check for functioning
and binding of moving parts, breakage of parts,
correct mounting, and any other conditions that
may affect the correct operation of the tool.
-
Damaged
safety
should be properly repaired or replaced by an
authorised Service Centre unless otherwise
indicated elsewhere in this instruction manual.
-
Have defective switches replaced by an
authorised Service Centre.
-
Do not use tool if its switch cannot be turned on
or off.
Warning
-
For your personal safety use only accessories
recommended in this instruction manual or in
the relevant catalogues The use of any other
accessory or attachment other than those
recommended in this instruction manual or in
the relevant catalogue may present a risk of
personal injury.
Have tools repaired by qualified personnel
-
This electric appliance is in accordance with
the safety rules in force. Only qualified experts
may carry out repairing of electric appliances
otherwise it may cause considerable danger for
the user.
3. Manufacturer and machine
The nameplate shown is fitted directly on the
machine. It indicates all the references and
information necessary for safe operation.
1
BUK2950000
A
Art. No. :
B
V~
Hz
D
E
min-1
cl.is
H
Ø max
Ø int.
O
S
Made by: CARAT NEDERLAND BV
Nikkelstraat 18, 4823 AB Breda (NL)
T
17
devices
or
other
A
P
F
G
µF
IP
YEAR
I
L
M
Q
P
R
N°
C
GB
parts
N
U