Publicidad
Idiomas disponibles
Idiomas disponibles
Suspected malfunctions are often due to causes that the users can fix themselves. Therefore, check the product using this
section. In most cases the problem can be solved quickly.
PROBLEM
Product does not start
Product does not
reach full power
Unsatisfactory result
EN - 20
TROUBLESHOOTING
POSSIBLE CAUSE
Direction selector at centrer lock position
Battery pack is not properly attached
Battery pack is completely discharged
Battery power is too low
Battery pack reaches its life cycle
Drill/driver bit is dull/damaged
Driver bit/ socket bit not suitable for intended
operation
SOLUTION
Push direction selector to proper side
Attach properly
Charge the battery pack
Charge the battery pack
Replace with new battery pack
Replace with new one
Use proper one
WWW.SENIXTOOLS.COM
Publicidad
