BoomToneDJ Mushroom RGBWAP Manual Del Usuario página 15

5- Troubleshooting
Here are some suggestions if you are having problems with your Mushroom LED device.

The device does not work at all.
o
o

The fixture does not respond or does not respond correctly to DMX commands.
o
o
o
o

Does not respond to sound
o
o
o
6- Maintenance
The exterior of the unit should be cleaned regularly. The lenses must be cleaned for
optimum brightness. If the unit is installed in a dusty or smoky environment this regular
maintenance is very important. It may be necessary to clean the optics from the inside as
well. Unplug the unit before servicing!
 Use a clean cloth with very little glass cleaner. Always dry the cleaned parts well.
Check the power cord and fuse.
Make sure your outlet is well powered.
Check your DMX cables
Check your DMX addressing
Try another DMX controller
Make sure that your DMX cables do not run close to high-voltage cables,
which could cause interference.
Check the selected operating mode
Make sure there is no DMX cable connected to DMX IN
Tap directly on the microphone to test its responsiveness.
14