Descargar Imprimir esta página

Hkoenig kbp40 Manual De Instrucciones página 9

Ocultar thumbs Ver también para kbp40:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 60
evaporator. Over the next 7-15 minutes ice forms on the evaporator. Once this has completed,
the ice tray will tilt backwards and the remaining water in the ice tray is drained back into the
water reservoir. The ice cubes are then dropped from the evaporator and pushed forward into
the ice basket by the ice shovel. The ice tray will automatically move back into position under
the evaporator and start the next cycle.
11.
The "
stop the ice-making cycle automatically. Gently remove the ice from the ice basket with the ice
scoop. About 5 seconds later, the ice maker will restart its ice making function automatically.
12.
The "
" indicator will light up when the water reservoir is lack of water and the
ice-making cycle will stop automatically. At that time, remove the ice basket and add water to
the water
reservoir, and then press "
indicator will not light up if the Ice Maker is operated under the condition that it is supplied with
water continuously.
13.
When you have got your desired amount of ice, stop the ice making cycle by pressing the
"
" key and unplug the unit from the wall outlet.
14.
Open the top lid and transfer the ice to a freezer.
NOTE: The ice will last in the ice maker for up to a 18 hour period, depending on the ambient
temperature.
15.
Allow the ice maker to wall up to room temperature.
16.
Suggest replacing the water every a week. Please empty the water reservoir if the ice
maker is not used for a long time.
" indicator will light up when the ice basket is full and then the ice maker will
" key again to restart the ice-making cycle. And the "
"

Publicidad

loading