DeWalt DCD792 Traducido De Las Instrucciones Originales página 196

EnGLIsh
TOOL CONNECT™ IMPACT DRIVER
DCF888
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Power output
No load speed
Mode 1
Mode 2
Mode 3
Impact rate
Max torque
Tool holder
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-2:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents impact tightening of fasteners of the
maximum capapcity of the tool. However if the tool is
used for different applications, with different accessories
or poorly maintained, the vibration and/or noise emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
26
WALT one of the
e
DCF888
V 18
DC
1
Li-Ion
W 400
rpm
0–1000
0–2800
0–3250
ipm 0–3800
Nm 205
6.35 mm
kg 0.9
dB(A) 96
dB(A) 107
dB(A) 3
m/s 2 22
m/s 2 2.1
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
EC-Declaration of Conformity
Machinery Directive
Tool Connect™ Impact Driver
DCF888
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2014, EN62841-2-2:2014.
These products also comply with Directive 2014/30/EU,
2011/65/EU and 2014/53/EU. For more information, please
contact D WALT at the following address or refer to the back of
e
the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
01.08.2019
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
WALT.
e