Descargar Imprimir esta página

MWF MF-60 Manual Del Usuario página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

MF - 60 Metal Detector. The Metal Detector is a hand-held metal detector designed to precisely
Search system :
pinpoint metallic (ferrous and nonferrous) objects during treasure recovery. The Metal Detector is
intended for use in conjunction with a ground search metal detector to aid in the recovery of
metallic targets. The Met al Detector has both audible and vibrating alarms to indicate the presence
of metal objects. The alarms increase in intensity as the Metal Detector is moved closer to the
Search principle:
metal target. With a pinpointing tip plus a scraping blade with side-scan capability, the Met al
Detector is very effective in easily detecting even the smallest of metallic objects. An LED flashlight
assists in dark and low light conditions. The Metal Detector has an IP 66 standard waterproof
rating, fully protecting it from the environment and allowing it to be washed under running water or
Operating processor:
operated in the rain. The Metal Detector's durability- based on will provide years of reliable
operation even in rugged environments
Operating frequency:
Microprocessor circuitry allows the Metal Detector to operate at maximum sensitivity without any
Power:
need of adjustments. The Metal Detector ideal for the recoveryof small items in a wide variety of
hunting conditions, ranging from highly mineralized ground to saltwater-saturated sand. You will
Power consumption:
find the Metal Detector to be an indispensable tool to: Speed target recovery; Accurately find small
objects; Prevent digging large holes; Identify multiple objects in near proximity; Search in tight
interior areas such as walls and ceilings; Serve as a utility pinpointer for locating metal pipes,
Battery life:
conduit, rebar and control boxes; and Locate nails and metal wall studs in homes
Charger:
Display Type:
Specialized to detects:
Depth Search:
Distance Search:
Results feedback:
Voice alerts:
Operating temperature:
Storage temperature:
ion radar built-in search system
Processing levels and ionic gold metal detector
MICROCONTLLER PIC18 & ARM 7
50 MHz
7.4v - 400mAh
Maximum of consumption 200 mA
8 work hours
9 volt 1 Amp / Full charge time: 30 minutes
A network of LEDs gradually increasing with
increasing signal intensity.
Metal & treasures
5 M
10 M
Through audio indicators and light interfaces.
Yes
From °15 C to °60 C
From °20 C to °60 C
O
Product introduction
Page
3

Publicidad

loading