Casselin CGRCA Manual De Instrucciones página 17

Model
Plate coating
plate type
Tension
Powerful
plate thickness
Upper plate thermostat
Lower plate thermostat
Top plate dimensions
Bottom plate dimensions
Dimensions
Weight
5. INSTALLATION AND USE
5.1 Safety instructions
ELECTRICAL HAZARD
Danger due to electric current!
• No contact with heat sources should take place with the electrical cord.
• The cord should not hang over the edge of a table or counter.
• Do not pour water into the appliance when it is running or still hot.
• The device must be properly connected and comply with the regulations in force.
WARNING
While operating, the device can reach high temperatures. To avoid burns and accidents, do not use the
device if it is malfunctioning, and do not use non-original spare parts.
ELECTRICAL HAZARD! Danger due to electric current!
If incorrectly installed, the device can be dangerous and cause injury. Before any installation, check the data
of the electrical network. Connect the device only when there is compliance. The device must be unpacked
and fully checked before connection by a professional.
ELECTRICAL CONNECTION
ELECTRICAL HAZARD! Danger due to electric current!
The device can cause injury if not properly installed. Before proceeding with its installation, compare the data
of the local electrical network with the indications which appear on the nameplate of the appliance.
• Connect the device only if there is conformity.
• Comply with safety rules.
Before connecting the device, make sure that the nominal voltage and frequency listed on the nameplate
comply with the values of the local electrical network: the maximum voltage difference must be plus or minus
10%.
The device must be earthed.
Place the device so that the socket is easily accessible in order to unplug the device if necessary.
5.2 Use
CGRCAD
Chromium
Smooth
230V
3000W+3000W+3000W+3000W
10mm
50°C to 220°C
50°C to 300°C
2 x W 280 x D 480 mm
W 650 x D 480 mm
W 660 x D 760 x H 480 mm
60kg
FR