MESTIC MQK-200 Instrucciones De Uso página 7

Using your heater
1. Connect the mains cable to the wall socket and check whether the mains voltage corresponds to the voltage
printed on the rating label of the device.
2. The heater is equipped with 2 different heat elements. Which you can enable separately from each other. The
right on / off switch is for the upper heating element. The left on / off switch is for the lower heating element. If a
heating element is switched on, the device has 400 watt heating capacity. If both heating elements are switched
on, the device has 800 watt heating capacity.
3. The device can become very hot on some parts, which can cause burns. You should take this into consideration,
especially when there are children and vulnerable people in the area.
Maintenance & cleaning
1. Before cleaning the device, allow it to cool down and unplug the power cord.
2. Do not immerse the device in water or clean it under running water.
3. Dust the grilles
4. With a damp sponge with water, only clean the housing of the device and then dry it with a dry cloth.
5. Do not use abrasives or sharp objects to clean the oven as this can scratch the oven body.
6. Before switching the heater on again and using it, allow all parts and the surface to dry thoroughly.
Disclaimer
Updates to hardware components are made regularly. Therefore some of the instruction, specifi cations and pictures
in this documentation may differ slightly from your particular situation. All items described in this guide for illustration
purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the
description made in this manual.
Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment This means
that this product must be handled pursuant to European Directive (2012/19/EU) in order to be recycled or
dismantled to minimize its impact on the environment. For further information, please contact your local
or regional authorities. Electronic products not included in the selective sorting process are potentially
dangerous for the environment and human heath due to the presence of hazardous substances.
Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device MQK-200, applies all basic requirements and other relevant
regulations listed in the European directive for electromagnetic compatibility (2014/30/EU) and low voltage directive
(2014/35/EU). If you require a full declaration of conformity, you can contact the adress listed on the backside of this
manual
ENGLISH