Publicidad
Idiomas disponibles
Idiomas disponibles
TWM 0960
ASSEMBLE THE BASE
Step 1
Step 2
Step 3
Step 4
Step 5
Step 1: Line up the groove in the base against the round notch in another half base panel and rotate the
parts as shown.
Step 2: Hold the two parts and press on one side
Step 3: Hold the other part and repeat the previous step.
Step 4 and 5: Put screws in the holes
FUNCTIONS
1. Standby mode: Plug the power cord into the socket. The appliance will enter standby status.
2. Power on: In STANDBY MODE, press "
". The appliance will start working at air level 2.
3. Air level: press "
"to adjust the air level. This level will be displayed on the screen (1-2-3).
4. Timer: Press "
"to set the timer. Adjustable up to 12h with 1h intervals.
5. Oscillation: Press "
"to make the appliance oscillate during use.
6. Screen off: press "
", all lights will be off. Press again and all the lights will turn on.
7. Temperature: The room temperature will be displayed on the screen.
13
Publicidad
