Cleaning And Maintenance; Storage; Dismantling And Utilization - Sonel DIT-500 Manual De Uso

When making measurements with a battery's mnemonic on,
one must take into account additional indefinite measure-
ment uncertainty or unstable working of the meter.
Open battery cover, then take out the battery from instrument
and replace with a new 9-Volt battery and place the battery cover
back.

8 Cleaning and maintenance


Repairs or service are not covered in this manual and should
only be carried out by qualified trained technician.

Periodically, wipe the body with a dry cloth. Do not use
abrasives or solvents on this instrument.

For service, use only manufacturer's specified parts.
9

Storage

In the case of storage of the device, the following recommenda-
tions must be observed:

Make sure the meter and its accessories are dry.

In the case the meter is to be stored for a prolonged period of
time, the batteries must be removed from the device.

10 Dismantling and utilization

Worn-out electric and electronic equipment should be gathered
selectively, i.e. it must not be placed with waste of another kind.
Worn-out electronic equipment should be sent to a collection
point in accordance with the law of worn-out electric and electronic
equipment.
Before the equipment is sent to a collection point, do not dis-
mantle any elements.
Observe the local regulations concerning disposal of packages,
worn-out batteries and accumulators.
Attention:
DIT-500 – USER MANUAL
41