Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
Take the oil radiator and all components from the package and remove all packaging materials.
INSTALLATION OF CASTERS
1. Turn the radiator upside down and rest on a soft surface to prevent scratching of the radiator
housing.
2. Fix the caster support on the oil heater body with U shape holders.
3. Install the casters on the baseboard.
4. After installation, turn the electrical oil heater over with casters on the ground and wait for 3 to
5 minutes before use.
Installation of water box:
These series of electrical oil heater include water box, it can be placed on the top of the heater to
humidify the ambiance.
Installation of drying rack:
The models 2000, 2500 and 2800 of these series of electrical oil heater has folding drying racks,
which can be installed on the electrical oil heater body after unfolding the drying rack.
Note: 1. This product is not suitable for drying inflammable and explosive items, high-grade
valuables and deformable items.
2. This product is suitable for use to dry small fabrics such as towels, handkerchiefs, socks and
gloves, etc.
3. The maximum support weight of the drying rack should not exceed 2kg.
OPERATION
Before use, please make sure that the rated voltage of the power socket is 220-240V AC, the rated
current is greater than 15A and there is a reliable and safe grounding device.
The electrical oil heater can only be used after the casters are properly installed.
USE:
(1) Rotate the thermostat clockwise to the top.
(2) Turn on the power switch to start heating. If you need to heat up quickly, adjust the power
switch to the highest power.
(3) When the room temperature meets your needs, you can adjust the thermostat back until
hear "click". At this time, the electrical oil heater will enter a constant temperature state and the
thermostat will operate as the temperature rises and falls.
SAFETY FEATURES
Your heater is fitted with a safety device to switches off the heater in the event of overheating. If the safety
device operated, please turn the heater off, unplug the appliance and let it completely cool, inspect for
blockage of air inlet or outlet, attempting to restart the heater then after.
If the heater fails to operate or the safety device switches the heater off again, return heater to your nearest
service center for examination or repair.
EN
9
Publicidad
