Publicidad
Idiomas disponibles
Idiomas disponibles
1. Fix ADJSUTSCREW A on the UPPER AIR TUNNEL of the oven, and then install
the oven into the cabinet.
⚫
Adjust the height of ADJUST SCREW A to keep 1mm gap between the
ADJUST SCREW A and the top plane of cabinet.
⚫
Do not trap or kink the power cord.
⚫
Make sure that the oven is installed in the center of the cabinet.
2. Open the door; fix the oven to the cabinet with SCREW B at the INSTALLATION
HOLE of TRIM KIT. Then fix the TRIM-KIT PLASTIC COVER to the INSTALLATION
HOLE.
SCREW B
18
TRIM-KIT PLASTIC COVER
INSTALLATION HOLE
Publicidad
