Audibax GROUND 4T Manual Del Usuario

GROUND 4T / GROUND 5T
Landscape Installation
2. Attach the
1.
landscape spike to the
speaker.
4.
Ground
Mounting
SPECIFICATIONS
Model Ground 4T
Woofer
4" PP Cone
Tweeter
0.75" Silk Dome
Frequency Response
120Hz-20kHz
Sensitivity(1M/1W)
83dB
Nominal Impedance 8
RMS Power
20W
Transformer
C70V: 1.25W-2.5W-5W-10W-NC & 8 ,
C100V: 2.5W-5W-10W-20W-NC & 8
IP Level
IP 66 (Wall/Floor Speaker Only)
Product Dimensions 138 x138 x190mm (5.4" x 5.4" x 7.5")
CARE AND MAINTENANCE
·Turn off the power to the speaker when unused for long periods of time.
·Ensure all equipment is turned OFF prior to cleaning.
·Surfaces and cabinet need only occasional dusting/cleaning. Never touch the speaker
drivers. Never use chemicals or solvents as they may damage the surface. Always clean using
a dry cloth.
3
3. Connect the wire to the speaker and
attach the top cover to the speaker.
5. Connections (For Speakers with
Transformer)
Ensure that the speaker is unplugged from
the mains before making any connections.
For the Ground 4T (From Power Amplifier to
Next Speaker)
-
+
+
-
1 2 1 2 1 2
+ - + - + -
For the Ground 5T(from power amplifier to
next speaker)
-
+
+
-
1 2 3 4 1 2 3 4 1 2 3 4
+ + - - + + - - + + - -
Ground 5T
5.25" PP Cone
1" Silk Dome
110Hz-20kHz
84dB
8
30W
C70V: 1.87W-3.75W-7.5W-15W-NC&8 ,
C100V: 3.75W-7.5W-15W-30W-NC&8
IP 66 (Wall/Floor Speaker Only)
170 x170 x240mm (6.7" x 6.7" x 9.4")
GROUND 4T
GROUND 5T
Please read the manual before using the product
USER´S
MANUAL