Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO USE
▶Remove all packaging from the lamp.
▶Attach the mount to the edge of any stable, horizontal surface.
▶Insert the lower shaft of the arm into the hole in the bracket.
▶Turn on the lamp by pressing the ON/OFF switch.
▶Place the head of the lamp in the desired position.
CHANGING THE LED TUBE
▶The lighting tube can be changed - the socket is G10Q - the
reference is 31140.
▶To change it, disconnect the lamp and remove the cap. Wait for the
lamp to cool down before changing the tube.
▶Rotate the head of the lamp, so that you can see the tube.
▶Remove the clear tube protection cover and set it aside.
▶Disconnect the 4-pin connector from the old tube from the socket
and dispose of it safely.
▶Fit the 4-pin connector of the new tube into the lamp holder. Press
the new tube into the clips to ensure that the tube is firmly attached.
▶Put the tube protection cover.
IMPORTANT FOR SAFE USE
▶Only use indoors.
▶Ambient temperature: -20°C / 40°C
▶Humidity: <95%
▶Never disassemble the lamp unless you are a qualified electrician.
▶Unplug while making any repairs to the magnifying lamp.
▶Never leave the lens alone in direct sunlight or where light may pass
through it. Since it can cause a dangerous fire!
▶If the external cable or cord of the appliance is damaged, it must be
replaced exclusively by the manufacturer or its service agent or a
qualified person, in order to avoid danger.
Instruction manual
TECHNICAL SPECIFICATIONS
▶22W - G10Q
▶220/240V - 50Hz (AC)
▶Lens diameter: Ø127mm
▶Magnification power: 3 diopters.
7
ref. 30286
Movement first joint 120º turn of the head.
Second joint movement 90º turn of the body.
Third joint movement 90º turn of
the body
ES
PT
EN
FR
Publicidad
