EDIFIER W820NB Plus Manual

W8 2 0 N B P l us
Wireless Noise Cancellation Over-Ear Headphones
EN 1. Power ON/OFF
1. Power ON: press and hold the "
about 3s when powered OFF until the LED
blinks blue.
2. Power OFF: press and hold the "
about 3s when powered ON until the LED
blinks red.
Note:
Under wireless mode: 1. If there is no Bluetooth connection for 5 minutes after
power on, the headphones will turn off automatically. 2. If there is no Bluetooth
connection when the noise cancellation is on, the headphones will turn off
automatically after 4 hours.
2. Pairing
Pairing for the f rst time i
1. Press and hold the "
when powered off. Blue and green LED
will blink alternately and rapidly.
2. Select "EDIFIER W820NB Plus" in your device
setting to connect. Blue LED will blink twice
after connected.
Note:
For subsequent use, the headphones will automatically connect to the device
used last time.
Pairing for new device
1. Press and hold the "
connected device and pair the new Bluetooth device. Blue and green LED
will blink alternately and rapidly.
2. Select "EDIFIER W820NB Plus" in your device setting to connect. Blue LED
will blink twice after connected.
3. Reset
Simultaneously press and hold the "
keys for about 5s when powered on to clear
pairing records. Blue LED will blink 6 times
rapidly when successful.
4. Charging
1. Connect the small end of the included USB cable to
the USB-C port of the headphones and connect the
other end to a USB-A power supply or wall charger
(not included).
2. Orange LED is steady lit when charging and off when
fully charged.
Note:
Please do not charge the headphones when there is sweat or other liquids
inside the charging port, which may damage the headphones.
Input: 5V 1A
5. Connecting to PC as wired headphones
1. Connect the small end of the included USB cable to the USB-C port of the
headphones and connect the other end to the USB-A port of the PC. You
can listen to music, talk and charge the headphones after the connection
is successful.
2. Orange LED is steady lit when charging and green LED is steady lit when
fully charged.
Note:
It is recommended to use the included USB cable, and other cables may have
compatibility issues that prevent them from working properly.
6. Controls
6s
3s
x1
x2
x1
x1
x2
Note:
1. : Press and hold.
2. Default sound control: noise cancellation & ambient sound.
3. Images are for illustrative purposes only and may differ from the actual
product.
4. Download Edif er Connect App for more customizable control settings.
For more information, please visit our website:
@Edifierglobal
Model: EDF200118
Edif er International Limited i
P.O. Box 6264
General Post Off ce i
Hong Kong
www.edif er.com i
2022 Edif er International Limited. All rights reserved. i
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,information
contained herein may be subject to change from time to time without prior
notice.
Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly different
from actual product.
If any difference is found, the actual product prevails.
Manual
" key for
" key for
" key for about 3s
" key for about 6s when powered off to skip the latest
i
www.edifier.com
@Edifier_Global
" " "
@Edifier_Global
3s
Indicator
Indicator
5s
Indicator
x1
x1
x1
x1
ANC
x2