Publicidad
Idiomas disponibles
Idiomas disponibles
EN
20
PRESERVING
The appliance can be used for preserving food as well as for heating water and
other liquids.
Preserving
1.
Place the insert grate in the cooker.
2.
Fill the food into jars and close the jars.
3.
Stack the jars on the rack as shown in the picture.
Note: With smaller glasses, more glasses fit into the device accordingly.
4.
Fill the cooker with enough water to cover 3⁄4 of the tallest glass with water.
Do not exceed the maximum mark.
5.
Put the cover on and turn the main switch on. Set the timer and then the
desired temperature. The device now starts to heat up, which can take up to
90 minutes. Once the set temperature is reached, the device automatically
switches from heating mode to keep-warm mode.
6.
Set the temperature and time according to the preserving table. The time
indicated there applies from the point at which the target temperature is
reached.
7.
After the set time has elapsed, the cooker switches off automatically and a
signal tone sounds.
Publicidad
