Philips 7000 Serie Manual Del Usuario página 12

ENGLISH
14
Cleaning
1 Disconnect the plug from the power outlet.
2 Remove the mixing chamber lid. (Fig. 3)
3 Loosen the front panel control knobs. (Fig. 4)
Note: The front panel is heavy. Take extra caution when removing it.
4 Disassemble the front panel, the shaping disc, the shaping disc holder, the mixing paddle,
and the mixing chamber in order. (Fig. 5)
5 Use a dry cloth to clean flour residue on the main unit. (Fig. 30)
6 Clean the shaping disc with the supplied cleaning tool to remove the dough residues.
After that, you can clean it with water. (Fig. 31)
Note: Let the discs air-dry for 2 to 4 hours, then use the corresponding cleaning tool to
poke out the dough in the holes.
7 Clean all detachable parts, and wipe them dry. (Fig. 6)
8 Use a dry cloth to clean the control panel, and the exterior of the pasta
Storage
1 Unplug the appliance and let it cool down. (Fig. 29)
Note: Make sure all parts are clean and dry before storing.
2 You can store the shaping discs in the storage drawer. (Fig. 33)
Note: Put the thicker shaping discs in slots with icons and , and put the thinner shaping
discs in the slots with icon . (Fig. 34)
Disposal
Your product is designed and manufactured with high quality materials and components,
which can be recycled and reused. For recycling information, please contact your local waste
management facilities or visit www.recycle.philips.com.
(Fig. 29)
maker. (Fig. 32)