essentiel b EBM11 Manual De Utilización página 29

Remove the blade gasket from the plastic
6.
base.
Warning!
When reassembling, pay close attention to the direction you fit the gasket on the base.
GENERAL CLEANING RECOMMENDATIONS
Immediately rinse all the parts after use for easy cleaning.
•
Wipe the motor unit with a sponge, and then thoroughly dry it with a soft cloth.
•
Stubborn stains can be removed with a damp sponge and possibly a little non-abrasive
•
detergent (washing up liquid, for example).
The removable parts (lid, measuring cap, blender jug) should be washed by hand with water
•
and washing up liquid. No removable parts can be placed in the dishwasher.
Be sure to clean the lid seal and the 2-crossed blades knife gasket thoroughly. When they
•
are clean and dry, put them back on the unit properly.
The blender jug should not be immersed in water or any other liquid. To clean the jug, see
•
the "Cleaning and maintenance - Cleaning the jug" section.
QUICK CLEANING OF THE JUG
To quickly rinse the jug (in between preparations, for example), you can use clean water and run the
appliance for a few seconds. In this case, do not use detergent.
THOROUGH CLEANING OF THE JUG
Use a brush to remove all traces of or food and rinse.
•
For a complete cleaning of the jug, pour 800 ml of clear water into the jug and a small
•
amount of washing-up liquid, close the lid and then run the appliance for a few seconds in
normal mode or in "PULSE" mode (refer to section "Use"). The blades will rotate to clean
the bowl, and you can stop the cleaning process at any time by turning the knob to the "0"
(OFF) position.
Rinse the jug again with clean water.
•
Then thoroughly wipe with a soft, dry cloth. Make sure the jug is completely dry before
•
placing it back on the motor unit.
V.1.0
cleaning and maintenance
29