Publicidad
Idiomas disponibles
Idiomas disponibles
Unused machines and machine tools should be kept in a dry, closed room.
Keep them free from damaging influences such as damp, frost or large temperature
fluctuations as well as mechanical damage. Always store the machine in a way that important
machine instructions, e. g. on stickers and signs, are legible.
Dispose of machine and worn out/defective machine tools according the local/national
regulations. Fully disassemble the machine for the necessary disposal. Separate materials
according to local environmental specifications. Dispose of environmentally hazardous greasing,
cooling or cleaning agents in order to avoid environmental contamination.
When working on or with the equipment, it is imperative to observe all legal
requirements in regards to waste-disposal and proper recycling. In particular
during installation, repair and maintenance work, water damaging agents, such as
• lubricating grease and oil, coolant, solvent containing cleaning agents
Must not leak into the ground or reach the sewage system!
These materials must be stored, transported, contained and disposed of in
suitable containers!
The following table shows possible problems and their causes:
Problem, cause, remedy
Problem
Machine does not start Not connected to compressed air
Machine is rotating too
slowly
Gear makes noises
Other problems
We ask you to send the machine to the manufacturer, if necessary.
Unless otherwise specified, our '' General Sales Terms" apply. Warranty and liability claims
in regards to persons or equipment damages are invalid, if one or more of the following causes
apply:
•
Improper use of the machine,
•
improper assembly, startup, operation or maintenance of the machine,
46
STORAGE
DISPOSAL
ENVIRONMENTAL REGULATIONS
TROUBLESHOOTING
Cause
Too little operating pressure
Hose diameter too small
Too little volume flow
-
-
WARRANTY AND LIABILITY
Remedy
Connect and open the supply line
Increase operating pressure
Choose larger hose diameter
Increase volume flow
Contact authorized expert company
Contact authorized expert company
Publicidad
