Publicidad
Idiomas disponibles
Idiomas disponibles
ES
PT
EN
FR
SHAVED OFF
▶To start shaving you must plug the machine into the mains. Make
sure that the voltage of the shaver is the same as in your home.
▶Then press the ON button (fig.5).
▶And now you can start, move the razor in the opposite direction of
the growth of the beard (fig.6).
▶Shaving is most effective when your face is dry, so please shave
before or when your face is dry after washing your face. It may take
some time for the skin to get used to the type of shaving.
▶The hair on the neck can also be shaved with the machine.
▶Turn off the shaver. Clean it and put the dustproof cap to avoid
damage (fig.7).
▶You should never use the shaver if you detect any blemishes or
damage to the heads. It could damage the skin.
Instruction manual
TRIMMER
▶Use it to trim the beard.
▶Slide the adjustment knob up to push out (fig. 8).
▶Turn on the shaver to cut the beard (fig.9).
▶Lubricate the teeth every two months with a drop of machine oil (you
CLEANING
▶Turn off and unplug the shaver to start cleaning.
▶The performance and durability of the machine will depend on
CLEANING FOR THE SHAVING UNIT
CLEANING THE SHAVING HEADS
can use the same oil used in sewing machines) (fig.10).
regular cleaning.
• You should clean the shaving unit every week.
• You need to run the brush over the top first.
• Subsequently, press the button to remove the heads and move
them away (fig.11).
• Pass the brush inside and under the heads (fig.12).
• Once everything is clean, close the heads again.
• The cleaning of the heads should be every two months.
• Press the opening button and remove the heads (fig.11).
• Remove the frame (fig.13)
• Slide the shaving heads out of the retaining frame one at a time.
(Note: do not change the set of blades and protectors, or else it
will affect the performance of the appliance (fig.14)).
• Clean the blades with the brush (fig.15).
• Clean the protectors with the brush (fig.16).
• You can also clean the shaving heads with a degreasing liquid
(ex: Alcohol) when you need it. Lubricate the shaving heads with
a drop of oil (such as the one used for the sewing machine) after
cleaning. This prevents wear on the shaving heads (fig.17).
• Put all the pieces back in their places.
ref. 07592
Publicidad
