Goodson CF-2004 Manual De Instrucciones

Please read instructions before using
Preparation
Unpack and check for shipping damage.
Complete unit shown below
(Fig. 1)
1. Unit has been pre-assembled and tested
for function and air leakage.
2. Install air cylinder in threaded casting, hand
tighten.
3. Install short air line from L fitting (M) just at
top of air cylinder to L fitting (G) on end of
air cylinder.
4. Insert air line by pushing firmly into plastic
1 / " opening on the valve.
4
5. Install shop air supply line (E) in fitting (M).
6. To disconnect hoses, simply squeeze
connector and pull hose out.
7. Attach compressor frame to new air cylinder assembly
with button screws (H) provided.
Setting adjustment
There are no limits set with screws or stops. Position
plunger with air control valves. Piston will stay in position
until the release of air valve.
REPLACEMENT PARTS LIST
NO. ORDER NO. DESCRIPTION
A CF-44 Jaws
B CF-2001-P Plunger
C CF-2003-H Push Button Head
D CF-2003-AC Air Cylinder
E CF-2001-AL 1 ⁄ " Air Line
4
F CF-2003-BCE Blue collar L-Fitting
G CF-2003-S Button Screw
H CF-2003-B Push Buttons
J CF-2003-C Cartridge Valve
K CF-2002-SS Cup point Screw Set 8-32 x
L DIB-6R Cup Point Screw Set 10-32 x
M CF-2003-L L-Fitting
N CF-2003-CS Allen Head Bolts
O CF-2001-FC Female Connection
P CF-2004-F Frame only
1
* ⁄ " Airline is sold by the foot
4
© Goodson Tools & Supplies
Valve Spring Compressor
Figure 1
G
A
3
⁄
16
1 ⁄
2
CF-2004
Instructions
P
B
C
Figure 2
N
K
H
J
L
E
E
M
O
D
E
C
D
E
M
April 2016
F